Skip to content
Marqilo
Marqilo · filament reference

3D printing answers, without the hype.

Filament guides, printer setups, and fix-it steps pulled from manufacturer specs, slicer docs, and what makers report. No shop, no upsell.

Start by materialStart by problemStart by printer

Browse by topic, surfaced by how you think about printing.

Each area opens to its own guides.

Materials/en/filaments/

Filaments

FDM materials, comparisons, care, and settings

Live · 77 guides
Hardware/en/printers/

Printers

Printers by brand, family, and model

Live · 20 guides
How-to/en/troubleshooting/

Troubleshooting

Defects and fixes (reactive)

Live · 40 guides
Applications/en/applications/

Applications

Industries, part types, and production at scale

Live · 60 guides
Reference/en/glossary/

Glossary

Cross-cutting term definitions

Live · 3 guides

Start by material

Each material keeps one color across the site. Color is wayfinding, not a rating.

PLAEasiest to printPLA vs PETGPick by what you printPETGTough, low warpPLA+Less brittle than PLAWhat is a filament dryer and how does it workFDM materials, comparisons, care, and settingsPETG versus ABS: which tough filament to pickFDM materials, comparisons, care, and settings

Start by problem

Pick the defect. Each one links to a cause-and-fix page.

StringingThreads between wallsPETG stringing: why PETG webs between moves and how to clear itDefects and fixes (reactive)PETG not sticking to the bed: why the first layer lifts and how to fix itDefects and fixes (reactive)PLA warping: why PLA corners lift and how to hold them downDefects and fixes (reactive)Clogged nozzle on a 3D printer: causes and how to clear itDefects and fixes (reactive)Extruder clicking: what the sound means and how to fix itDefects and fixes (reactive)

Start by printer

Each printer owns its per-material settings pages.

Creality Ender 3Tuned for clean printsPETGPrinters by brand, family, and modelPETGPrinters by brand, family, and modelPLAPrinters by brand, family, and modelPETGPrinters by brand, family, and modelPETGPrinters by brand, family, and model

Featured & recently updated

PLA

PLA filament, for people who want it to just work

What PLA filament is, how to print it, and the settings that fix stringing, warping, and bed adhesion, in plain language.

3D

Stringing: why your prints grow hairs, and how to stop it

What causes 3D print stringing, ranked by likelihood, with the retraction, temperature, and drying fixes that clear it up.

PLA

PLA versus PETG, decided by what you are printing

PLA versus PETG compared on ease, strength, heat resistance, and cost, with a clear pick for each common use case.

PLA

The Creality Ender 3, set up to print cleanly

What the Creality Ender 3 does well, its common weak points, and the tuning steps that turn a stock Ender 3 into a reliable printer.

PET

PETG filament, for stronger and hotter parts

What PETG filament is, how to print it at 240 to 250 °C without stringing, and why it sits between PLA and ABS for strength and heat.

PLA

PLA+ filament, and when it beats plain PLA

What PLA+ filament is, how it differs from PLA, and whether the extra toughness is worth it. Print settings, brand variation, and when to pick it.

How Marqilo works

01 · Sources

Tier 1 and Tier 2 evidence

Manufacturer and slicer docs first, then established technical sources. No seller pages, no affiliate roundups.

02 · Labels

Honest about what is tested

Every page carries a trust label. At launch, guides are Researched Guidance. Marqilo Tested starts at zero.

03 · Freshness

Dated and revisited

Each page shows a last-reviewed date and goes back into review on a schedule. Old claims get rechecked or removed.

English now. Português (Brasil) and Español are scaffolded and noindexed until they hold real, localized pages. Root redirects to English.